Nortel Networks Mediant TP-1610 SIP - Manual (Page 95)

Mediant 2000 SIP User’s Manual 6. ini File Configuration of the Mediant 2000
Version 4.4 95 July 2005
Table 6-1: Basic, Logging, Web and RADIUS Parameters (continues on pages 90 to 97)
ini File Field Name
Web Parameter Name
*
Valid Range and Description
ResetWebPassword Allows resetting to default of Web password to:
Username: “Admin”
Password: “Admin”
DisableWebConfig 0 = Enable changing parameters from Web (default)
1 = Operate Web Server in “read only” mode
HTTPport HTTP port used for Web management (default = 80)
Customizing the Web Appearance Parameters
For detailed information on customizing the Web Interface, refer to
Appendix F on page 207 .
UseProductName 0 = Disabled (default).
1 = Enabled.
If enabled, the ‘UserProductNane’ text string is displayed instead of the default
product name.
UserProductName Text string that replaces the product name.
The default is “Mediant 2000”.
The string can be up to 29 characters.
UseWebLogo 0 = Logo image is used (default).
1 = Text string is used instead of a logo image.
If enabled, AudioCodes’ default logo (or any other logo defined by the
‘LogoFileName’ parameter) is replaced with a text string defined by the
‘WebLogoText’ parameter.
WebLogoText Text string that replaces the logo image.
The string can be up to 15 characters.
LogoWidth Width (in pixels) of the logo image.
Note:
The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes’ displayed logo.
LogoFileName Name of the image file containing the user’s logo.
File name can be up to 47 characters.
The logo file name can be used to replace AudioCodes’ default Web logo with a User
defined logo.
Use a gif, jpeg or jpg image file.
BkgImageFileName Name of the file containing the user’s background image.
File name can be up to 47 characters.
The background file can be used to replace AudioCodes’ default background image
with a User defined background.
Use a gif, jpeg or jpg image file.
RADIUS-Related Parameters
For detailed information on the supported RADIUS attributes, refer to Section
K.7 on page 251 .
EnableRADIUS
[Enable RADIUS]
0 = RADIUS application is disabled (default).
1 = RADIUS application is enabled.
AAAIndications
[AAA Indications] 0 = No indications (default).
3 = Accounting only
MaxRADIUSSessions
[Max. RADIUS Sessions]
Number of concurrent calls that can communicate with the RADIUS server (optional).
The valid range is 0 to 240.
The default value is 240.
SharedSecret
[Shared Secret]
“Secret” used to authenticate the gateway to the RADIUS server. It should be a
cryptographically strong password.
RADIUSRetransmission
[RADIUS Max.
Retransmissions]
Number of retransmission retries.
The valid range is 1 to 10.
The default value is 3.
RadiusTO The interval between each retry (measured in seconds).
The valid range is 1 to 30.
The default value is 10.
RADIUSAuthServerIP
[RADIUS Authentication Server
IP Address]
IP address of Authentication and Authorization server.