Nortel Networks Mediant TP-1610 SIP - Manual (Page 28)

Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 28 Document #: LTRT-72504
Figure 3-1: 19-inch Rack & Desktop Accessories
3.3 Mounting the Mediant 2000
The Mediant 2000 can be mounted on a desktop, or installed in a standard 19-inch rack. Refer to
Section
3.4 on page 30 for cabling the Mediant 2000.
3.3.1 Mounting the Mediant 2000 on a Desktop
No brackets are required. Optionally, attach the four (supplied) anti-slide bumpers to the base of
the Mediant 2000 and place it on the desktop in the position you require.
3.3.2 Installing the Mediant 2000 in a 19-inch Rack
Users can install the device in a standard 19-inch rack either by placing the device on a shelf
preinstalled in the rack (preferred method), or by attaching the device directly to the rack’s frame
via integral brackets.
Before rack mounting the chassis, attach the two (supplied) brackets to the front sides of the
device (refer to
Figure 3-2 ).
To attach the two front side brackets, take these 3 steps:
1. Remove the 2 screws nearest the front panel on either side of the device.
2. Align a bracket over 2 holes on one side (so that the bracket’s larger holes face front) and
with the 2 supplied replacement screws, screw in the bracket.
3. Perform the same procedure on the other side.