Nortel Networks Mediant TP-1610 SIP - Manual (Page 97)

Mediant 2000 SIP User’s Manual 6. ini File Configuration of the Mediant 2000
Version 4.4 97 July 2005
Table 6-1: Basic, Logging, Web and RADIUS Parameters (continues on pages 90 to 97)
ini File Field Name
Web Parameter Name
*
Valid Range and Description
BootPDelay The interval between the device’s startup and the first BootP/DHCP request that is
issued by the device.
1 = 1 second (default).
2 = 3 second.
3 = 6 second.
4 = 30 second.
5 = 60 second.
Note:
This parameter only takes effect from the next reset of the device.
ExtBootPReqEnable 0 = Disable (default).
1 = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the BootP request
to provide device-related initial startup information such as board type, current IP
address, software version, etc. For a full list of the vendor specific Information fields,
refer to Section
10.3 on page 169 .
The BootP/TFTP configuration utility displays this information in the ‘Client Info’
column (refer to
Figure B-1 ).
Note: This option is not available on DHCP servers.