Nortel Networks Mediant TP-1610 SIP - Manual (Page 96)

Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 96 Document #: LTRT-72504
Table 6-1: Basic, Logging, Web and RADIUS Parameters (continues on pages 90 to 97)
ini File Field Name
Web Parameter Name
*
Valid Range and Description
RADIUSAuthPort
[RADIUS Authentication Port] Port number of Authentication and Authorization server.
The default value is 1645.
RADIUSAccServerIP
[RADIUS Accounting Server IP
Address]
IP address of accounting server.
RADIUSAccPort
[RADIUS Accounting Port]
Port number of Radius accounting server.
The default value is 1646.
RadiusAccountingType
[RADIUS Accounting Type] Determines when a RADIUS accounting report is issued.
0 = At the Release of the call only (default).
1 = At the Connect and Release of the call.
2 = At the Setup and Release of the call.
BootP and TFTP Parameters
IniFileURL Specifies the name of the ini file and the location of the TFTP server from which the
gateway loads the ini and configuration files.
For example:
tftp://192.168.0.1/filename
tftp://192.10.77.13/config<MAC>
Note:
The optional string “<MAC>” is replaced with the gateway’s MAC address.
Therefore, the gateway requests an ini file name that contains its MAC address. This
option enables loading different configurations for specific gateways.
CmpFileURL Specifies the name of the cmp file and the location of the TFTP server from which the
gateway loads a new cmp file and updates itself.
For example: tftp://192.168.0.1/filename
Note 1:
When this parameter is set in the ini file, the gateway always loads the cmp
file after it is reset.
Note 2:
The version of the loaded cmp file isn’t checked.
The BootP parameters are special "Hidden" parameters. Once defined and saved in the flash memory, they are used
even if they don't appear in the ini file.
BootPRetries BootP retries. Sets the number of BootP requests the device sends during start-up.
The device stops sending BootP requests when either BootP reply is received or
Number of Retries is reached.
1 = 1 BootP retry, 1 second.
2 = 2 BootP retries, 3 second.
3 = 3 BootP retries, 6 second (default).
4 = 10 BootP retries, 30 second.
5 = 20 BootP retries, 60 second.
6 = 40 BootP retries, 120 second.
7 = 100 BootP retries, 300 second.
15 = BootP retries indefinitely.
Note:
This parameter only takes effect from the next reset of the device.
BootPSelectiveEnable Enables the Selective BootP mechanism.
1 = Enabled.
0 = Disabled (default).
The Selective BootP mechanism enables the gateway’s integral BootP client to filter
unsolicited BootP/DHCP replies (accepts only BootP replies that contain the text
“AUDC" in the vendor specific information field). This option is useful in environments
where enterprise BootP/DHCP servers provide undesired responses to the gateway’s
BootP requests.
Note:
When working with DHCP (EnableDHCP=1) the selective BootP feature must
be disabled.