Getting started with ao applications in software – National Instruments DAQ M Series User Manual

Page 59

Advertising
background image

Chapter 5

Analog Output

© National Instruments Corporation

5-11

NI 6236 User Manual

Getting Started with AO Applications in Software

You can use an M Series device in the following analog output applications.

Single-point (on-demand) generation

Finite generation

Continuous generation

Waveform generation

You can perform these generations through programmed I/O, interrupt, or
DMA data transfer mechanisms. Some of the applications also use start
triggers and pause triggers.

Note For more information about programming analog output applications and triggers in
software, refer to the NI-DAQmx Help or the LabVIEW 8.x Help.

Advertising