Nortel Networks NN44200-313 - Manual (Page 19)

Configuring system parameters (LD 17) 19
Prompt Response Notes
ELAN xx Enter the number entered for
the ELAN ID above.
SECU YES
5 To exit the overlay, enter ****.
Tech tip: To view the new ELAN, enter LD 22. Enter PRT at the REQ
prompt, then ADAN. A list of all provisioned IDs appears. Use the
capture text function in hyperterminal to save a text file of the output.
—End—
Configuring system parameters (LD 17)
Tech tip: To view a list of all provisioned system parameters, enter LD 22
and enter PRT at the REQ prompt, then CFN. Use the capture text function
in hyperterminal to save a text file of the output.
Step Action
1 Connect to the PBX.
2 Enter LD 17.
3 Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
Table 4
LD 17 - Configuring system parameters
Prompt Response Notes
REQ CHG
TYPE PARM
NCR xxx Enter the number of DS0
channels multiplied by 2 plus
the current NCR.
For example, if the current NCR
is 500 and there are 24 DS0
channels, enter 548.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.