Nortel Networks NN44200-313 - Manual (Page 9)

9
CallPilot 5.0 installation
The CallPilot 5.0 Quickstart Guide provides basic instructions on new
hardware installation and basic configuration of a CallPilot 5.0 system. After
using this guide to set up a basic CallPilot configuration, you should be
able to dial a mailbox, leave a message and retrieve a message using the
telephone. For more detailed configuration information, see the appropriate
technical documentation.
This document is designed to be followed from start to finish and is intended
for experienced installers.
Prerequisites to CallPilot 5.0 installation
Before you proceed with installation of a CallPilot 5.0 system using this
guide, you should have the following knowledge and skills:
• Understanding of basic programming and provisioning for CallPilot 5.0.
• Understanding of basic programming and provisioning for the
Communication Server 1000 (CS 1000) or Meridian 1 (M1) system.
• Knowledge of personal safety precautions to take to minimize risk of
injury when installing components.
DANGER
Risk of injury by electric shock
To minimize risk of injury by electric shock, take care when
working with power equipment and connections.
DANGER
Risk of injury by laser
Never look directly into the end of a fiber cable or use an
optical device to look at the end of a fiber cable unless you are
certain that the other end of the cable is not connected. The
laser traveling through a fiber cable can injure the retina.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.