Nortel Networks NN44200-313 - Manual (Page 30)

30 CallPilot resource configuration
6 To exit the overlay, enter ****.
—End—
Saving CS 1000/M1 changes (LD 43)
Perform the following procedure to save all configuration changes. If a
reboot occurs before you save the system, all your changes could be lost.
Tech tip: The prompt for LD 43 is just a period ".". Entering the command
EDD will complete a data dump to the on board flash.
Step Action
1 Connect to the PBX.
2 Enter LD 43.
3 At the "." prompt, enter EDD.
4 To exit the overlay, enter ****.
—End—
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.