Nortel Networks NN44200-313 - Manual (Page 22)

22 CallPilot resource configuration
Table 8
LD 15 - Configuring Integrated Services Digital Network
Prompt Response Notes
REQ CHG
TYPE net
CUST xx Customer number for CallPilot.
ISDN YES
NO
Enter NO if NMS is not installed
on the CS 1000 or M1 system.
PNI xxxxx Private Network Identifier.
Within one network, use the
same PNI value in LDs 15 and
16. When you interwork with
different networks, enter the
PNI of this CS 1000 or M1
system in LD 15, and the PNI of
the target or remote CS 1000 or
M1 system in LD 16.
The default PNI = 0 prevents
the operations of features such
as NRAG, NACD and NMS.
HLOC xxxx Home Location Code defined in
LD 90.
LSC xxxx Local Steering Code defined in
LD 15.
7 To exit the overlay, enter ****.
Tech tip: To view a list of installed packages, enter LD 22 and enter
PRT at the REQ prompt, then PKG. Use the capture text function in
hyperterminal to save a text file of the output.
—End—
Configuring the Route Data Block (LD 16)
Perform the following procedure to configure the Route Data Block.
Step Action
1 Connect to the PBX.
2 Enter LD 16.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.