NeoDigits.com X3000 HD - Manual (Page 18)

• Wireless connection to an Access Point
You can connect HELIOS X3000 to your network wirelessly by first clicking <Setup> on
your remote control. Once you enter the setup menu, choose <WiFi Setup> to get to the
submenu. Once in <wireless> settings, you need to switch the “preferred network” to
wireless (the default is wired) and then reboot the player. After rebooting, go to
<wireless> settings again to setup the parameters to your wireless AP (Access Point).
• Wireless connection to an Ad-Hoc network
If your wireless network does not use a wireless router / switch or you only have 1
wireless computer with no wireless infrastructure, you will need to use the Ad-Hoc