NEC VisuaLink 128/384 - Manual (Page 113)

NDA-24230 Issue 2.0 Page 7-5
VisuaLink 128/384 User Guide Chapter 7
PIP position: Sets the display position for PIP on the monitor screen. Possible
settings are:
Top right
Top left
Bottom right
Bottom Left
PIP format: Sets the video image to be displayed in PIP.
Non_Mirror: displays the video image as is
Mirror: displays the video image as it would be seen in a mirror
PIP of Snap: Sets the display image to be shown in the PIP when a snapshot is
displayed on the screen.
Send: displays the motion video image that is sent to the far-end
Receive: displays the motion video image being transmitted by the
far-end
➂ Move the cursor up and down with CAMERA CONTROL button to select
the appropriate option.
➃ Press the left or right side of the CAMERA CONTROL button to toggle
through all the possible settings.
PIP position : <Bottom right>
PIP format : <Mirror >
PIP of Snap : <Receive >
Press ENTER after choosing.
▲
ENTER
CAMERA
CONTROL