NEC VisuaLink 128/384 - Manual (Page 115)

NDA-24230 Issue 2.0 Page 7-7
VisuaLink 128/384 User Guide Chapter 7
7.3 Camera Preset
Menu
During a videoconference, you may want the camera to point at a particular
person or location, such as at the main speaker or at a flipchart. Camera presets
are buttons that let you store camera positions for the main and sub-camera. After
you set a camera preset, all you have to do is press one numerical button to make
the main or sub-camera move to that stored preset.
To set camera preset button:
① Set the camera to the desired position. Adjust the image using CAMERA
CONTROL and ZOOM buttons. Keep doing this until the camera is
showing the image exactly the way you want it.
➁ Press the MENU button to display the on-screen icons.
➂ Select REGISTRATING THE CAMERA PRESET POSITION icon
using the left or right side of the CAMERA CONTROL button.
➃ Press ENTER button.
Note: Camera preset selection allows two setting: NEAR END and FAR END.
▲
Registering the camera preset position.
ENTER
CAMERA
CONTROL
Camera Preset Select : <NEAR END>
Press ENTER after choosing.