3 remote switching – NEC VisuaLink 128/384 User Manual
Page 128
Advertising
Page 8-8
NDA-24230 Revision 1.0
Chapter 8
VisuaLink 128/384 User Guide
8.5.3 Remote switching
To switch the transmitted picture sent from the remote site:
① Press the FAR END button.
.
The system switches control from local to remote control. This is indicated by the
local message.
Note: Image as seen by the local site.
➁ Press the MAIN CAM or CAM 2 button.
The far site sends the camera selected.
➂ When CAM 2 button is pressed:
Note: Image as seen by the local site.
FAR END
Irving
Remote control: Camera 1
CAM 2
Irving
Remote control: Camera 2
MAIN CAM
Advertising