NEC VisuaLink 128/384 - Manual (Page 65)

NDA-24230 Issue 2.0 Page 5-7
VisuaLink 128/384 User Guide Chapter 5
The setting screen is displayed. The current setting is displayed.
Note 1: To select an item use the up and down portion of the CAMERA
CONTROL button.
Note 2: To change a setting use the left and right portion of the CAMERA
CONTROL button to toggle through the item.
➂ Press ENTER button to define it after changing a setting.
Note: After changing a setting, please turn off the power and on again.
➃ Press the MENU or CANCEL button three (3) times to proceed back to the
video image.
ENTER
Video format : < FCIF>
Video coding : < H263 >
Video priority : < Motion >
Camera type : < EVI-D30 >
Video source
VIDEO1 : < Camera1 >
VIDEO2 : < Camera2 >
MUTE function : <Audio and Video>
Press ENTER after choosing.
▲
CAMERA
CONTROL
Video format: Sets the video format. Possible settings are:
FCIF:352 x 288 or QCIF:176 x 144
Video Coding: Sets the default coding rate. Possible settings are:
H.261 or H.263
Video priority: Sets the default video coding transmission rate. Possible settings
are:
Motion: more of the bandwidth dedicated toward fps.
Resolution: more of the bandwidth dedicated toward resolution.
Camera mod: Sets the type of camera to be controlled. Possible settings are:
EVI-D30 or VC-CI
Video 1 and 2: Operate together. Sets which of the video inputs labeled on the
back of the VisuaLink are to be camera 1 or 2.
MUTE function Sets the audio to a mute or sets the audio and video to mute.