NEC VisuaLink 128/384 - Manual (Page 57)

NDA-24230 Issue 2.0 Page 4-29
VisuaLink 128/384 User Guide Chapter 4
Congratulations Screen
The VisuaLink is now setup for the configuration you have entered. Press the
ENTER button on the REMOTE CONTROLLER, the VisuaLink will display a
blue screen and recycle. The VisuaLink should will power up to a normal state.
You may begin to use the video conferencing system immediately.
Note: If there are no My Numbers entered in the configuration the VisuaLink
will display the Start Up screens.
Step 2—Optional User Settings
Key in the number of one of the following
applications.
Applications:
1. Rollabout/Other
2. Data Conference
3. Gateway
4. Desktop
Press CANCEL to page back
Congratulations, you have just finished setting
up your VisuaLink system.
For VisuaLink software updates and general
VisuaLink knowledge, visit the NEC Knowledge
base web site at :
http://www.cng.nec.com or
http://www.ilibrary.com/phoenix/ntachome.nsf
/homepagenav?opennavigator
- You may begin to use the video conferencing
system immediately.
- Press ENTER to activate your configuration.
Press CANCEL to page back