NEC VisuaLink 128/384 - Manual (Page 121)

NDA-24230 Issue 2.0 Page 8-1
VisuaLink 128/384 User Guide Chapter 8
Chapter 8 Operation Method
This chapter explains how to perform basic remote control functions of the
VisuaLink 128 or VisuaLink 384, such as switching monitor screens, and
controlling cameras. Your system is ON if the light near the power display on the
front of the VisuaLink unit is lit.
If the VisuaLink is not ON, press the POWER SWITCH on the front of the
VisuaLink unit.
8.1 System Status The STATUS button on the hand held remote provides information that you might
want to know during your videoconference. It displays call status, which camera
is currently sending the image and the time.
8.1.1 Check the system status
① Press STATUS button.
The status information appears at the top and bottom of the screen.
POWER HEADSET
POWER LINE
B1 B2-B6
Power Switch Power LED
STATUS
①
Irving
➃
12:00
➁ Local control: ➂ Camera 1