NEC VisuaLink 128/384 - Manual (Page 16)

Page 2-2 NDA-24230 Issue 2.0
Chapter 2 VisuaLink 128/384 User Guide
2.2 Front Panel
Description
This section briefly describes names and features of the VisuaLink 128 and
VisuaLink 384.
① POWER Switch
The push-button switch is used to turn on and off the main power. When the
power is on, the power lamp will be lit.
➁ Remote controller optical receiver
This is a optical receiver, which receives signal from remote controller.
➂ LED Display
Power Lamp (power) : a green light will eluminate when the power is ON.
When the VisuaLink is powered OFF, there is no light.
Line connection status lamp (LINE)
LINE B1: Flashing light indicates channel is calling to the remote end.
Steady light indicates connection/communicating with the remote end.
LINE B2-B6: Flashing light indicates channel is calling to the remote end.
Steady light indicates connection/communicating with the remote end.
➃ Head set terminal
The head set jack is used to connect an optional headset.
POWER HEADSET
POWER LINE
B1 B2-B6
① ➁ ➂ ➃