7 maintenance settings, Maintenance settings -29 – NEC VisuaLink 128/384 User Manual
Page 87
Advertising
NDA-24230 Issue 2.0
Page 5-29
VisuaLink 128/384 User Guide
Chapter 5
5.7 Maintenance
Settings
This sets the loopback test, viewing of hardware/software revision levels and
initializing of the VisuaLink.
To set the maintenance functions.
① Select the MAINTENANCE icon in the Environment Setting menu.
➁ Press ENTER button.
The current setting screen is displayed.
▲
Maintenance.
CAMERA
CONTROL
ENTER
CALL PAGE
Software version
22 . 02 . 37
Hardware version
12 . 00 . 00
Loopback test
:
< OFF >
Next page: CALL PAGE
Press ENTER after choosing.
▲
Status display for
software and hardware
revisions
Loopback test setting
Advertising