Ricoh Aficio Copy Machine 180 - Manual (Page 202)

Error & Status Messages on the Operation Panel
47
6
Ready The printer is ready for print-
ing. —
Remove Paper Stan-
dard Tray The standard output tray is
full. Remove the paper from the
standard output tray
Important
❒ Remove the paper from
the output tray before it
becomes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
Remove Paper 1Bin
Tray The internal 1bin tray is full. Remove the paper from the
internal 1bin tray.
Important
❒ Remove the paper from
the output tray before it
becomes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
Replace Maintenance
Kit It is time to replace the parts
included in the Maintenance
Kit. Call your sales or service
representative.
Replace PCU It is time to change the PCU. Call your sales or service
representative.
Reset PCU The photoconductor unit is
not installed in the printer. Call your sales or service
representative.
Reset Fusing Unit Cor-
rectly The fusing unit is not set cor-
rectly. Set the fusing unit correctly.
Resetting Job... Job is being reset. Wait for a while.
Reset Tray 1 Correctly Tray 1 is not set correctly. Set tray 1 correctly.
Reset Tray 2 Correctly Tray 2 is not set correctly. Set tray 2 correctly.
Warming Up... The printer is now preparing
for printing. Wait until the printer is
warmed up.
Waiting... Printer is waiting for the next
data to print. Wait for a while.
Messages Description Resolution