Ricoh Aficio Copy Machine 180 User Manual
Page 277
NetWare Configuration
42
3
D
Click
[IPX protocol]
.
E
Select the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click
[Next >]
.
Note
❒ If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
F
Confirm that the MAC and IPX addresses are correct, and click
[Finish]
.
[NIB Setup Tool]
window appears.
G
Click
[Configure]
.
The property sheet appears.
H
Click the
[NetWare]
tab, and make the following settings.
A In the
[Print Server Name]
box, input the name of the print server.
B In the
[File Server Name]
box, input the name of the file server in which a
print server is to be created.
Clicking
[Browse]
, you can select a file server among those listed in the
Browse dialog.
C In the
[NDS Context]
box, input the context in which the print server is to
be created.
Clicking
[Browse]
, you can select a context among those listed in the
Browse dialog.
Note
❒ Object names must be input from a lower level and divided by a period.
For example, if you want to create a file server into NETWORK under
DS, input “NETWORK. DS”.
D In the
[Print Server Operation Mode]
group, click
[As Remote Printer]
.
E In the
[Remote Printer No.]
box, input the number of the printer.
Important
❒ Use the same number as that of the printer to be created in the print
server.
F Click
[OK]
to close the property sheet.
G After a confirmation dialog appears, click
[OK]
.
I
In the
[NIB]
menu, click
[Exit]
to exit the NIB Setup Tool.