Ricoh Aficio Copy Machine 180 - Manual (Page 298)

Remote Maintenance by Telnet (mshell)
63
5
Network Boot
Use the set command to configure a network boot.
msh> set parameter {on | off}
“On” means active and “Off” means inactive.
Note
❒ When you use RARP+TFTP, BOOTP, DHCP, the server also needs to be con-
figured.
❒ DHCP takes precedence over all other settings.
255. 0. 0. 0 192.XXX.XXX.XXX
255.255. 0. 0 192.168.XXX.XXX
255.255.255. 0 192.168. 15.XXX
255.255.255.255 192.168. 15. 16
Parameter Configuration Method
ping ARP+PING
tftp RARP+TFTP
bootp BOOTP
dhcp DHCP
Access Control Mask IP addresses that can access
the printer