Ricoh Aficio Copy Machine 180 - Manual (Page 274)

NetWare 4.x, 5 - Advanced Settings
39
3
ery mode, use the NIB Setup Tool Wizard.
⇒
P.29 “Quick Setup Using the NIB
Setup Tool Wizard”
A
Log in to the file server as an Admin or an Admin equivalent.
B
Run the NIB Setup Tool.
Reference
“Running the NIB Setup Tool”
⇒
P.28.
C
Click [Property Sheet] and click [OK] .
The Browse dialog of the Network Interface Board appears.
D
Click [IPX protocol] .
E
Select the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click
[Next >] .
Note
❒ If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
F
Confirm that the MAC and IPX addresses are correct, and click [Finish] .
[NIB Setup Tool] window appears.
G
Click [Configure] .
The property sheet appears.
H
Click the [NetWare] tab, and make the following settings.
A In the
[Print Server Name] box, input the name of the print server.
B In the
[File Server Name] box, input the name of the file server in which a
print server is to be created.
Clicking
[Browse] , you can select a file server among those listed in the
Browse dialog.
C In the
[NDS Context] box, input the context in which the print server is to
be created.
Clicking
[Browse] , you can select a context among those listed in the
Browse dialog.
Note
❒ Object names must be input from a lower level and divided by a period.
For example, if you want to create a file server into NETWORK under
DS, input “NETWORK. DS”.
D In the
[Print Server Operation Mode] group, click [As Print Server] .
E Click
[OK] to close the property sheet.
F After a confirmation dialog appears, click
[OK] .