Ricoh Aficio Copy Machine 180 - Manual (Page 271)

NetWare Configuration
36
3
J
Input “PCONSOLE” from the command prompt.
F:> PCONSOLE
K
Create a print queue as follows.
Note
❒ If you use a currently defined print queue, proceed to the step L.
A In the
[Available Options] menu, select [Print Queue Information] .
B Press {
Insert } and input a print queue name.
C Press {
Esc } to return to the [Available Options] menu.
L
Create a printer as follows.
A In the
[Available Options] menu, select [Print Server Information] .
B To create a new print server, press {
Insert } and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the
[Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H-A).
C In the
[Print Server Information] menu, select [Print Server Configuration] .
D In the
[Print Server Configuration menu] , select [Printer Configuration] .
E Select the printer which is indicated as “Not Installed”.
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
H-D).
F If you change the name of the printer, input a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
G As Type, select
[Remote Parallel, LPT1] .
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press {
Esc }, and click [Yes] in the confirmation dialog.
I Press {
Esc } to return to the [Print Server Configuration Menu] .