Ricoh Aficio Copy Machine 180 - Manual (Page 574)

KEY OPERATOR SETTINGS
189
7
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
Fax
} key.
B
Press the
{{{{
User Tools/Counter
}}}} key.
C
Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Key Op. Settings” using the
number keys and press the
{{{{
#
}}}}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
E
Enter the function number for
“User Parameters” using the
number keys.
F
Select a number for a switch you
wish to change by pressing
[
↑↑↑↑
Switch] or [
↓↓↓↓
Switch] .
G
Press a number key correspond-
ing to the bit number you wish to
change e.g., press
{{{{
0
}}}} to change
bit 0.
H
When you have finished, press
[OK] .
Note
❒ If you press [Cancel] , the speci-
fied settings are canceled and
the display shown in 3 appears
again.
I
Press [PrevMenu] .
J
Press the
{{{{
User Tools/Counter
}}}} key.
Printing the User Parameter List
Print this list to see the current User
Parameter settings.