Ricoh Aficio Copy Machine 180 - Manual (Page 258)

Setting up a Client Computer
23
2
Setting up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows NT Server or Windows NT Workstation as a print server.
Note
❒ Explanation of this section assumes that the client has already been config-
ured to communicate with a Windows NT print server. Do not proceed with
the following instructions until the client has been set up and configured cor-
rectly.
Windows 95/98
To print from Windows 95/98, you must install the printer driver and change
the printer port to the print server.
A
Install the printer driver as a local printer.
Reference
For more information, refer to the Operating Instructions for your printer.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
Click [Start] , point to [Settings] , and then click [Printers] .
C
Select the icon of the printer you want to use by clicking it. On the [File]
menu, click [Properties] .
D
Click the [Details] tab, and click [Add Port] .
Windows NT 4.0
Print Server
Windows 95/98 Windows NT4.0