Ricoh Aficio Copy Machine 180 - Manual (Page 470)

POLLING RECEPTION
85
4
B
Enter the “Polling RX” function
number with the number keys.
Note
❒ If the appropriate display is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
C
Depending which method you
are using, choose one of the fol-
lowing procedures:
Default ID Polling Reception
A Press the 0 0 0 0 or 1 1 1 1 key to select
the Default ID and press [OK] .
ID Override Polling Reception
A Press the 0 0 0 0 or 1 1 1 1 key to select
the Override ID and press [OK] .
B Enter a polling ID (4 charac-
ters) with the number keys and
the letter (A–F).
Note
❒ If you make a mistake, press
the
{
Clear/Stop
} key and try
again.
❒ 0000 and FFFF is not avail-
able.
D
Press [OK] .
The Transmission Mode menu is
shown. A check mark is added to
Polling Reception.
Note
❒ To cancel Polling Reception,
press [Cancel] . The Transmis-
sion Mode menu is shown.
E
Press [Exit] .
The following display is shown.
Note
❒ “Polling RX” is displayed.
F
Dial and press the
{{{{
Start
}}}} key.
Polling Reserve Report
This report is printed after Polling Re-
ception has been set up.
Note
❒ By default this report is turned off.
Turn it on with the User Parame-
ters.
⇒
P.184 “Changing the User
Parameters”
Polling Result Report
This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.