Roland PCR-1 - Manual (Page 20)

20
Getting Connected and Installing Drivers (Windows)
Windows 2000 users
1
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
2
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel . In Control Panel , double-click the System icon.
fig.05-2_30
3
Click the Hardware tab, and then
click [Driver Signing] .
The Driver Signing Options
dialog box will appear.
4
Make sure that “File signature verification” is set to “Ignore” .
If it is set to “Ignore” , simply click [OK] .
If it is not set to “Ignore”, make a note of the current setting (“Warn” or
“Block”). Then change the setting to
“Ignore” and click [OK] .
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows Start button. From the menu that appears, select
“Run...”
The “Run...” dialog box will appear.
Log on to Windows as a
user with administrative
privileges (such as
Administrator)
If you changed “File
signature verification”
,
you must restore the
previous setting after you
have installed the driver.
(
➝If you changed “File
signature verification” (p.
23))
PCR-1_e1.book 20 ページ ２００３年１１月２０日 木曜日 午後３時２２分