Inputting channel/block data, P. 81) – Roland PCR-1 User Manual
Page 81
81
Use MIDI functionality
Inputting channel/block data
If a system exclusive message includes a channel or GS block number, here’s how to specify the
type and the value of the upper bits. For the channel and block number, the setting of the
current channel
will be inserted as the lower bits. (The block number is not actually a channel,
but corresponds to the
“part”
within a GS sound module. On the PCR-1, this corresponds to the
channel for the sake of convenience.)
For an actual example, refer to
(p. 84) in the section on the Edit Mode.
1.
Press the
[DATA]
key several times at the location where you want to input the channel/
block number, to select “0CH” for the channel or “0BL” for the block.
fig.chbl
2.
Use the
[0]
–
[7]
keys to input the value of the upper four bits.
The “0” in the display will change to the numerical value that you input.
3.
Press the
[ENTER]
button.
Current channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CH
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
BL
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
F
[DATA]
[DATA]
[DATA]
[DATA]
PCR-1_e1.book 81 ページ ２００３年１１月２０日 木曜日 午後３時２２分