Roland PCR-1 - Manual (Page 85)

85
Use MIDI functionality
■
TEMPO ASSIGN
You can assign a controller to adjust the speed (20–250) of the F8 Clock message.
* In order to transmit F8 Clock messages, the F8 CLOCK setting must be “ON”.
( ➝ “F8 CLOCK ON/OFF” (p. 94))
fig.edt2
1
Press the [EDIT] button.
The display will indicate “EDT.”
2
Slightly move the controller to which you want to assign
TEMPO. In the case of a button, press that button.
The display will indicate the number of the selected controller.
fig.r-1
3
Confirm what’s indicated and press the [ENTER] button.
4
Press an ASSIGNABLE FUNCTION key ( ) on the keyboard enough times
to get "TMP" to appear in the display.
fig.tmp
5
Confirm what’s indicated and press the [ENTER] button.
6
If you are making the assignment for a button, specify the button mode.
(
➝ Specifying the button mode (p. 62))
In the case of a button, the value will be fixed at maximum (250) for ON, and minimum (20) for
OFF.
PCR-1_e1.book 85 ページ ２００３年１１月２０日 木曜日 午後３時２２分