Roland PCR-1 - Manual (Page 26)

26
Getting Connected and Installing Drivers (Windows)
Settings and checking
■
Specifying the audio and MIDI input/output destination
Windows XP users
1
Open Control Panel .
Click the Windows start button, and from the menu that appears, select
Control Panel .
2
Open the Sounds and Audio Devices Properties dialog box.
In “Pick a category” click “Sound, Speech, and Audio Devices” . Next, in
“or pick a Control Panel icon” , click the sounds and Audio Devices icon.
3
Click the Audio tab.
fig.XP_J
4
For MIDI music playback , click the
located at the right of [Default device]
, and select the following from the list
that appears.
5
Close the Sounds and Audio Devices Properties dialog box.
Click [OK] to complete the settings.
Sound playback EDIROL PCR-1
Sound recording EDIROL PCR-1
Depending on how your
system is set up, the
Sounds and Audio
Devices icon may be
displayed directly in the
Control Panel
(the Classic
view). In this case, double-
click the Sounds and
Audio Devices
icon.
For details on the PCR-1’s
input/output devices,
refer to Input / output
devices
(p. 44)
For details on adjusting the
audio latency and using
ASIO Direct Monitor, refer
to Taking full advantage
(p. 29).
This completes settings for using the PCR-1 with an application that uses the standard
Windows device settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR-1’s input/output devices, refer to Input / output devices (p. 44).
PCR-1_e1.book 26 ページ ２００３年１１月２０日 木曜日 午後３時２２分