Roland PCR-1 - Manual (Page 53)

53
Use MIDI functionality
Setting the MIDI Transmit Channel
To control your sound module, set the PCR-1's current channel to the MIDI receive channel that's
selected on your sound module. Use MIDI Channel mode to set the current channel .
MIDI Channel mode (MIDI CH)
fig.MIDIch-1
fig.MIDIch
1
Press the [MIDI CH] button.
The [MIDI CH] button will light. The display will show the current
channel setting.
* The [HEX] or [DECIMAL] button will also light according to the input mode
(p. 54).
2
Use the [DEC] [INC] buttons or the [0] – [F] keys of the keyboard to specify the desired
channel number.
3
Press the [ENTER] button. The current channel has now been set.
DEC Change the current value by -1
INC Change the current value by +1
00–0F
The input value
HEX ...00–0F
DECIMAL ...1–16
Current channel
The "current channel" is the transmit channel for the keyboard, bender switch, and modulation
button.
* Each controller has its own independent transmit channel setting.
However, if OMNI mode (p. 54) is on, the controllers will also transmit on the current channel you
specify here.
2
3
1
PCR-1_e1.book 53 ページ ２００３年１１月２０日 木曜日 午後３時２２分