Roland PCR-1 - Manual (Page 35)

35
Getting Connected and Installing Drivers (Macintosh)
fig.3-8_35
6
Choose “Open” from the File
menu.
From the OMS Setting folder that
you copied in step 3 , select the PCR-
1 file, and click [Open] .
A screen like the one shown here
will appear.
fig.3-9_35
7
From the Edit menu, select OMS
MIDI Setup .
In the OMS MIDI Setup dialog box
that appears, check Run MIDI in
background , and click [OK] .
fig.3-10_40
8
From the File menu, choose Make
Current .
* If you are unable to select Make
Current , it has already been applied,
and you may continue to the next step.
9
Verify that MIDI transmission and
reception can be performed correctly. From the
Studio menu, choose Test
Studio .
fig.OMS3
10
Try moving the fader of the PCR-1.
If the arrow beside number
1 or 2 in
the diagram at right blinks, the
settings have been made correctly.
A diamond mark ( ◊) indicate in the settings are enabled.
For details on the PCR-1’s
input/output devices,
refer to Input / output
devices
(p. 44).
PCR-1_e1.book 35 ページ ２００３年１１月２０日 木曜日 午後３時２２分