Omnitron Systems Technology iConverter 10/100M - Manual (Page 21)

Page 21
3.4.5 Access the 10/100M Remotely
Remote access to the 10/100M is provided via SNMP, Telnet, FTP or an external serial modem connected
to the Serial Console Port.
3.4.5.1 Accessing the 10/100M via NetOutlook (SNMP)
The 10/100M module can be remotely accessed by SNMP-client software such as NetOutlook or third-
party SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the
required parameters.
NetOutlook Chassis View and Trap Log Screens
3.4.5.2 Accessing the 10/100M via Telnet
The 10/100M is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It
is highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.