Omnitron Systems Technology iConverter 10/100M - Manual (Page 24)

4.0 DETAILED MODULE CONFIGURATION
4.1 OVERVIEW
The 10/100M has module parameters that require configuration depending on the application. The Module
configuration screen is accessible by selecting the module slot number from the Chassis View screen. To
access the Module configuration menu, select 1 at the Management Options screen, press <ENTER>. The
Chassis Selection screen will be displayed. From the Chassis Selection screen, select the chassis number
where the 10/100M module is installed.
NOTE: Module configuration is also available using NetOutlook.
Chassis Selection iConverter, Serial Agent
Number Chassis Name
1 NMM
2 Not Available
3 Not Available
4 Not Available
5 Not Available
6 Not Available
7 Not Available
8 Not Available
9 Not Available
10 Not Available
11 Not Available
12 Not Available
13 Not Available
14 Not Available
15 Not Available
16 Not Available
17 Not Available
18 Not Available
19 Not Available
Connected to Chassis Number 1
Chassis Number(1-19), Management Options(0), (H)elp, E(x)it > 1
By selecting Chassis Number 1, from the Chassis Selection screen, the Chassis View screen will be displayed.
Page 24