5 access the 10/100m remotely – Omnitron Systems Technology iConverter 10/100M User Manual

Page 21

Advertising
background image

Page 21

3.4.5

Access the 10/100M Remotely

Remote access to the 10/100M is provided via SNMP, Telnet, FTP or an external serial modem connected
to the Serial Console Port.

3.4.5.1

Accessing the 10/100M via NetOutlook (SNMP)

The 10/100M module can be remotely accessed by SNMP-client software such as NetOutlook

or third-

party SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the
required parameters.

NetOutlook Chassis View and Trap Log Screens

3.4.5.2

Accessing the 10/100M via Telnet

The 10/100M is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It
is highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences
screen, option 6.

Advertising