Omni Group GREEN SMART 864 - Manual (Page 12)

12 Installation
(for qualified installers only)
© Travis Industries 4090507 100-01217_000
Minimum Framing Dimensions – Top or Side Vent Configuration
* The 23" (584mm) dimension is based upon 1/2" (13mm)
drywall around the perimeter of the fireplace on both sides. If
using thicker drywall (or other facing), you will need to adjust this
dimension.
44"
1118mm
Minimum 42”(1067mm)
Fireplace Enclosure Height
NOTE:
The shaded framing must be
installed after placing the fireplace
in position.
The framing above the fireplace
interferes with the top of the fireplace.
If using the side vent configuration, do
not install the framing to the left side
(shown in light gray).
38-1/2"
978mm
23" *
584mm
Back
Front
Right
Left