Omni Group GREEN SMART 864 - Manual (Page 68)

68 Optional Equipment
(for qualified installers only)
© Travis Industries 4090507 100-01217_000
16 Disconnect the power lead from accent light and connect it to the power lead included with this kit
(see Figure 24). Attach the power lead to the fan controller in the “AUX OUT” receptacle (see
Figure 25).
Figure 24 Figure 25
NOTE
: If using the optional fan, you will want to disconnect its power lead and connect it to
the extra power lead included with this kit, then connect it to the “FAN” receptacle on
the fan controller.
17 Attach the included velcro to the bottom of the fan control module and to the base of the fireplace
near back left of the fireplace. Slide the fan controller into place and secure using the velcro
(see Figure 26).
Figure 26