Omni Group GREEN SMART 864 - Manual (Page 63)

Optional Equipment
(for qualified installers only)
63
© Travis Industries 4090507 100-01217_000
Installation
WARNING
: Make sure power to the fireplace has been shut off prior to installation.
NOTE
: Refer to the wiring diagram on page 62 while making wiring harness connections.
1 Remove the concealment cover from the front of the fireplace (see Figure 1).
Figure 1
2 Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove the
control cover (see Figure 3)
Figure 2 Figure 3
3 Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapter
plugged into the wiring harness.
Figure 4