Omni Group GREEN SMART 864 - Manual (Page 64)

64 Optional Equipment
(for qualified installers only)
© Travis Industries 4090507 100-01217_000
4 Disconnect the molex connector leading to the gas control valve (see Figure 5).
WARNING
: The tabs on the gas control valve are fragile. Take care when removing the molex
connector to not pull or damage the wires or tabs.
Figure 5
5 Disconnect the two leads on the back of the control panel for the IPI / CPI switch (continuous pilot
/ greensmart pilot – see Figure 6).
Figure 6
6 Disconnect the comfort control valve connection (see Figure 7). Disconnect the burner control
connector from the fireplace burner control (see Figure 8).
Figure 7 Figure 8