Omni Group GREEN SMART 864 - Manual (Page 43)

Finalizing the Installation
(for qualified installers only)
43
© Travis Industries 4090507 100-01217_000
Center Log Installation
The log shelf has two tabs
used to align the center log.
Bend these tabs as shown to
the right.
Place the center log in place.
Make sure the two tabs on the
log shelf insert into the two
holes on the bottom of the log.
Bend these two tabs up 90°. They are used
as pins to locate the center log.
Once in place,
rotate the log
clockwise until
the indents in the
log contact the
grate.