Omni Group GREEN SMART 864 - Manual (Page 22)

22 Installation
(for qualified installers only)
© Travis Industries 4090507 100-01217_000
Diffuser Plate Adjustment
Certain vent configurations require the diffuser plate to be adjusted (refer to the approved vent configuration
charts for details). See the directions below to change the diffuser to position.
Back Wall of Firebox
Firebox Roof
Remove the exhaust
restrictor.
1/4" Nutdriver
Remove the diffuser.
1/4" Nutdriver
Secure the diffuser plate
with the screws
removed earlier.
Replace the exhaust
restrictor (see “Exhaust
Restrictor Adjustment”
for restrictor settings).
Bend the round portion of the
diffuser 90° (position # 1).
Before (Stock - Position # 2)
After (Position # 1)
DIFFUSER SIDE VIEW