Omni Group GREEN SMART 864 - Manual (Page 59)

Optional Equipment
(for qualified installers only)
59
© Travis Industries 4090507 100-01217_000
Andiron Installation
Install the andirons after installing all other optional equipment (firebacks, accent light, etc) but before
installing the logs.
Part Numbers: Arabesque 98500633 -- Colonial 98500631 -- Wrought Iron 98500632
b
Lift up on the
burner and slide
the upper portion
of the bracket into
the gap between
the burner and
grate.
Disassemble one of the andiron
brackets. a
c
d
e
f
Pull on the
bracket so it
is all the way
forward.
Attach the andiron (with
bracket) to the bracket on
the fireplace using the
screws removed in step “a”.
You may need to bend the
bracket slightly to allow the
andirons to stand vertically.
5/32” Hex
Wrench
Repeat steps “a” through “e”
for the opposite side.
Attach the andiron to the
lower portion of the
bracket with the included
screw (use the included
5/32” hex wrench).