Omni Group GREEN SMART 864 - Manual (Page 52)

52 Finalizing the Installation
(for qualified installers only)
© Travis Industries 4090507 100-01217_000
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 38). Remove the logs and embers (if installed - page 42).
2
Remove the grate , firebacks, and center burner (see illustration below).
1/4" Nutdriver
Remove the grate from both sides.
NOTE : lift the burner to remove the grate.
Remove the log shelf
Four screws hold the center
burner in place. Slide the
burner to the right and up to
remove.