Omni Group GREEN SMART 864 - Manual (Page 25)

Installation
(for qualified installers only)
25
© Travis Industries 4090507 100-01217_000
Side Vent Configuration with Vertical Termination
• The termination must fall
within the shaded area
shown in the chart. Use
the indicated restrictor
and diffuser positions.
• Up to four elbows (45°
or 90°) may be used.
• Only one horizontal
elbow may be used.
5 feet (1.5m)
0 feet
0 feet
5 feet (1.5m)
0 feet
20 feet (6m) 20 feet (6m)
5 feet (1.5m) 10 feet (3m)
5 feet (1.5m) 10 feet (3m)
0 feet
15 feet (4.5m)
20' max (6m)
10 feet (3m)
15 feet (4.5m)
15 feet (4.5m) 20' max (6m)
10 feet (3m)
15 feet (4.5m)
40' max (12m)
Exhaust Restrictor # 4
Intake Restrictor # 2
Diffuser Position # 1
25 feet (7.5m)
30 feet (9m)
35 feet (10.5m)
40' max (12m)
25 feet (7.5m)
30 feet (9m)
35 feet (10.5m)
Exhaust Restrictor # 2
Intake Restrictor # 1
Diffuser Position # 1
This is considered a horizontal
elbow (it does not matter
whether it turns right or left).
It may be a 90° or 45° elbow.
This is considered a
vertical elbow
Horizontal length is calculated by adding
both lengths of horizontal run
(Horizontal Length = H1 + H2).
H1
H2