Omni Group GREEN SMART 864 - Manual (Page 65)

Optional Equipment
(for qualified installers only)
65
© Travis Industries 4090507 100-01217_000
7 Unscrew the on/off/battery plate from the control panel (see Figure 9). Pull the plate and wiring
forward (see Figure 10).
Figure 9
Figure 10
8 The control panel has plastic wire-locks attached to the back (see Figure 11). Un-hook the wires
from the wire-locks and remove the wiring harness, plate, battery holder, and ac adapter (see
Figure 12). These items may be discarded.
Figure 11
Figure 12
9 Use the included torx wrench to remove the stock regulator (see Figure 13). These items may be
discarded.
Figure 13