Quadra-Fire QFP38-NG - Manual (Page 59)

Quadra-Fire • QFP38 Series • 4061-300 Rev i • 9/09 59
Lays in groove
in front log
Figure 15.12 Position Log #4061-176
• Place this log in the white-painted groove of ember bed
and front log as shown in Figure 15.13.
Figure 15.13 Position Log #4061-177
• The overall placement of the fi rst eight logs is shown in
Figure 15.14.
Figure 15.14 Almost Final Log Set
• Place this log in the white-painted groove of ember bed
and front log. See Figure 15.12.
• Place this log in the left-hand groove in the back log and
the tab as shown. See Figure 15.11.
Lays in groove
in back log
Slot over tab
Figure 15.11 Position Log #4061-175
• Place this log in the right-hand groove in the back log
and the tab as shown. See Figure 15.10.
Lays in groove
in back log
Slot over tab
Figure 15.10 Position Leg #4061-174
• Position the slot in the log over the tab in front of the rear
burner. See Figure 15.9.
Figure 15.9 Position Log #4061-173
• Adjust log forward for NG and push back for LP. There
is only a slight adjustment.