Appliance setup, Warning – Quadra-Fire Expression 36 QV36A-FB User Manual

Page 37

Advertising
background image

37

Quadra-Fire • Expression 36 (QV36A-FB) • 2062-900 Rev. S • 11/11

12

12

Appliance Setup

A. Remove Shipping Materials

Remove shipping materials from inside or underneath the
fi rebox.

B. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.

C. Accessories

Install approved accessories per instructions included
with accessories. See Service Parts List for appropriate
accessories. Refer to Section 16.

Shock or fi re risk.

Use ONLY optional accessories approved for
this appliance.

• Using non-listed accessories voids warranty.

• Using non-listed accessories may result in a

safety hazard.

• Only Hearth & Home Technologies approved

accessories may be used safely.

D. Ember Placement

Explosion Risk.

• Follow ember placement instructions in manual.

• Do NOT place embers directly over burner ports.

• Replace ember material annually.

Improperly placed embers interferes with proper burner
operation.

Placing the Ember Material

Ember material is shipped with this gas appliance. To place
the ember material:

• Embers CANNOT be placed directly over ports. Care

should be taken not to cover the lighting trail of ports
(from back to front).

• When placing Glowing Embers

®

onto the burner care

should be taken so that the ports are not covered. Place
the dime-size ember pieces just in front of the port trail,
but not on or in between the ports. Failure to follow
this procedure will likely cause lighting and sooting
problems.

• Place Mystic Embers on areas of base refractory away

from port holes. Use this material to give the appliance
a realistic ash bed.

• Save the remaining ember materials for use during

appliance servicing. The embers provided should be
enough for 3 to 5 applications.

WARNING

WARNING

Advertising