Quadra-Fire Expression 36 QV36A-FB - Manual (Page 40)

Quadra-Fire • Expression 36 (QV36A-FB) • 2062-900 Rev. S • 11/11 40
Figure 12.7
Figure 12.8
Figure 12.9
1 1
LOG #6: (SRV340-705)
Rest log #6 on the left smooth cut-out area on top
of log #1 and place the lower end on log #3. The
notch on the bottom of log #6 should rest on the
wedge shape on the end of log #3.
LOG #5: (SRV330-704)
Place the “Y” end of log #5 against the corre-
sponding bump on log #3. The other end of the
log should rest in the second smooth cut-out area
on top of log #1.
LOG #4: (SRV330-706)
Nest log #4 in the cut-out area on the right side of
log #1. The thinnest “arm” of log #4 rests on top
of log #2.
2 2 3 3
4 4
1 1
2 2
3 3
4 4
5 5
1 1
2 2 3 3
4 4
5 5
6 6