Texas Instruments TMS320C674X - Manual (Page 58)

EMAC Control Module Registers www.ti.com
3.2 EMAC Control Module Software Reset Register (SOFTRESET)
The EMAC Control Module Software Reset Register (SOFTRESET) is shown in Figure 13 and described
in Table 10 .
Figure 13. EMAC Control Module Software Reset Register (SOFTRESET)
31 16
Reserved
R-0
15 1 0
Reserved RESET
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 10. EMAC Control Module Software Reset Register (SOFTRESET)
Bit Field Value Description
31-1 Reserved 0 Reserved
0 RESET Software reset bit for the EMAC Control Module. Clears the interrupt status, control registers, and CPPI
Ram on the clock cycle following a write of 1.
0 No software reset.
1 Perform a software reset.
58 EMAC/MDIO Module SPRUFL5B – April 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated