Texas Instruments TMS320C674X - Manual (Page 63)

www.ti.com EMAC Control Module Registers
3.7 EMAC Control Module Interrupt Core Miscellaneous Interrupt Enable Registers
(C0MISCEN-C2MISCEN)
The EMAC control module interrupt core 0-2 miscellaneous interrupt enable register (CnMISCEN) is
shown in
Figure 18 and described in Table 15
Figure 18. EMAC Control Module Interrupt Core 0-2 Miscellaneous Interrupt Enable Register
(CnMISCEN)
31 16
Reserved
R-0
15 4 3 2 1 0
Reserved STATPENDEN HOSTPENDEN LINKINT0EN USERINT0EN
R-0 R/W-0 R/W-0 R/W-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 15. EMAC Control Module Interrupt Core 0-2 Miscellaneous Interrupt Enable Register
(CnMISCEN)
Bit Field Value Description
31-4 Reserved 0 Reserved
3 STATPENDEN Enable CnMISCPULSE interrupt generation when EMAC statistics interrupts are generated
0 CnMISCPULSE generation is disabled for EMAC STATPEND interrupts.
1 CnMISCPULSE generation is enabled for EMAC STATPEND interrupts.
2 HOSTPENDEN Enable CnMISCPULSE interrupt generation when EMAC host interrupts are generated
0 CnMISCPULSE generation is disabled for EMAC HOSTPEND interrupts.
1 CnMISCPULSE generation is enabled for EMAC HOSTPEND interrupts.
1 LINKINT0EN Enable CnMISCPULSE interrupt generation when MDIO LINKINT0 interrupts (corresponding to
USERPHYSEL0) are generated
0 CnMISCPULSE generation is disabled for MDIO LINKINT0 interrupts.
1 CnMISCPULSE generation is enabled for MDIO LINKINT0 interrupts.
0 USERINT0EN Enable CnMISCPULSE interrupt generation when MDIO USERINT0 interrupts (corresponding
to USERACCESS0) are generated
0 CnMISCPULSE generation is disabled for MDIO USERINT0.
1 CnMISCPULSE generation is enabled for MDIO USERINT0.
63 SPRUFL5B – April 2011 EMAC/MDIO Module
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated